Oslo OSP1-08 Use And Care Manual Download Page 3

Safety Instructions 

1. All wiring must comply with local and national electrical codes and be installed by a qualified electrician. If 

you have any questions regarding to the following instructions, please contact a qualified electrician. 

2. The unit must be installed in accordance with national wiring regulations. Check available power supply 

and resolve any wiring problems before installation and operation of this unit. 

3. For your safety and protection, this unit will be grounded through the power cord plug when plugging into 

a matching wall outlet. If you are not sure whether the wall outlet at your home are properly grounded, 

please consult an electrician. If supply cord is damaged, it must be replaced by the manufacturer, its service 

agent or similarly qualified person in order to avoid any hazards. 

4. This appliance is not intended for people  (including children)  with reduced physical, sensory or mental 

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction 

concerning use of the appliance by a person responsible for their safety. Young children should be 

supervised to ensure that they do not play with the appliance. 

 

 

WARNING

 

To reduce the risk of fire, electrical shock or injury when using your air conditioner, follow up these basic 

precautions: 

 

Indoor use only, it is prohibited to use this unit outdoors or in humid environment such as bathroom etc. 

 

Do not remove ground prong. 

 

Do not use an adapter. 

 

Do not use an extension code. 

 

Never share the power outlet with other appliances. 

 

Never connect or disconnect the power plug with wet hands to avoid electric shocks. 

 

Never turn off the unit by unplugging. 

 

Unplug air conditioner before servicing. 

 

Never dismantle, repair or modify the unit without authorization to avoid body injury or property damage, 

be sure it repaired by manufacturer or professionals. 

 

After the air conditioning    installation, please ensure that the wires plug in good condition and securely 

inserted into the power socket, and always maintain the power cord placement rules orderly, avoid 

someone stumbled or pull the plug out. 

 

Never put any objects into the unit. 

 

Never cover or obstruct air inlet or outlet to prevent overheating.   

 

Never hit or shake the unit to prevent damage. 

 

Never spray water or place the unit near water to prevent electric shocks. 

 

Never place the unit near gas appliances, fire or flammable liquids. 

 

Move and install the unit by two or more people. 

 

The unit should be far away from the gas, flammable gas, stoves, or other heat source 

 

This appliance can be used by children aged from 8 years and above and persons with reduced 

physical, sensory or mental capabilities or lack of experience and knowledge if they have been given 

 

2

Summary of Contents for OSP1-08


















Reviews: