6
oska.uk.com | 0845 381 0600
oska.uk.com | 0845 381 0600
7
OPERATION
1.
During normal operation, the pump
will monitor pressure changes.
If the pressure is below a user-
defined pressure level, the pump
will automatically start to inflate the
mattress. The pump will stop when
the user-defined pressure level is
reached.
2.
If the pressure is consistently low,
the audible alarm will beep and
its indicator will come on to bring
attention to a low pressure condition.
3.
If there should be obvious leakage,
for example caused by loose
connection of tubes, the audible/
visible alarm will be activated.
4.
Press the Alarm Reset button to
mute alarm: its indicator will flash
5.
Press the Alarm Reset button again
to have the audible alarm and its
indicator on.
6.
For nursing and caring convenience,
press the Auto Firm button to
automatically inflate the mattresses
to the maximum level (above 180kg)
for about 30 minutes. The pressure
will return to a previously user
defined level after 30 minutes.
7.
In the case of a poor connection with
tubing, or any other air leakage from
the mattress, low pressure conditions
will occur and the audible/ visual
alarm will be activated.
SYSTEM MAINTENANCE
Maintenance at regular intervals
(mandatory every 2 years) is necessary
to preserve the function of the OSKA
Series3 system.
Used filters must be exchanged within
this period.
Maintenance/inspection is carried out
by the producer or an authorized firm or
engineer at the client’s expense.
If the maintenance is not performed
within the first 2 years of the products
life or not conducted by an authorised
firm or engineer then the warranty
claims become invalid. Damage or any
other loss of function arising from the
lack of maintenance or interferences by
an unauthorised party will also invalidate
the product’s warranty.
MAINTENANCE/INSPECTION
INCLUDES THE FOLLOWING
PROCEDURES:
1.
Replace membrane unit
2.
Replace air filter
3.
Replace synchronous motor
4.
Conduct function test/function check
5.
Sealing of case and attaching an
inspection sticker
6.
Protective conductor check in
accordance with DIN VDE 0751
CLEANING
Dirt or stains should be removed using
warm water with a mild detergent and
a cloth. Do not use aggressive cleaning
agents or solvents.
Regular wipe disinfection is
recommended using a suitable
disinfectant cleaner and following
manufacturer’s guidelines.
The Top covers are machine washable.
Care must be taken, in order to maintain
the integrity of the covers.
Light Blue Cover – This cover can
be machine washed up to 70˚C for
disinfection, following manufacturer’s
dosing directions. Tumble dry on low
heat and ensure cover is thoroughly dry
before replacing.
Dark Blue Cover – This cover can
be machine washed up to 95˚C for
disinfection, following manufacturers
dosing directions. Tumble dry on low
heat and ensure cover is thoroughly dry
before replacing.
CPR Valve
Bi-elastic, vapour
permeable top cover
Carry handles
Series3 digital
pump
Air outlet
connection
Anchor end
straps
