SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
3-12
31215918
Steering
On the platform control station, position the lift/
drive select switch to the drive position.
To steer the machine, engage trigger switch and
the thumb operated steer rocker-switch
on the
joystick handle. Press to the right for steering
right, or to the left for steering left. When released,
the switch will return to the center-off position
and the wheels will remain in the previously
selected position. To return the wheels to the center position, the
switch must be activated in the opposite direction until the wheels are
centered.
Traveling Forward and Reverse
Position the platform lift/drive select
switch to drive/steer position.
Squeeze the trigger switch on front
of the joystick, and move the joy
-
stick forward to drive forward or
backward to drive in reverse. The
drive system is proportional, for
additional drive speed push the joystick further from the neutral posi
-
tion in the direction of travel. Releasing the trigger switch or returning
the joystick to center will stop machine movement.
NOTE:
To ensure proper operation of the desired platform function,
move the joystick in the direction of the black or white arrow
that matches the color of the arrow on the chassis for the
intended direction of travel.
Raising And Lowering Platform
1.
If the machine was shut down, place the key selector switch
to the platform position.
2.
Position emergency stop switches, one at the platform and
one at the ground control station to the ON position.
3.
Position the lift/drive
select switch to lift.
4.
Squeeze and hold the trig
-
ger switch, and move the
joystick back (platform up -
white arrow direction) or
move the joystick forward
(platform down - black
arrow direction) and hold until desired elevation is reached.
Releasing the trigger switch or moving the joystick back to
its center position will stop the function being operated.
To
order
go
to
Discount-Equipment.com
