SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION
3-6
31215918
DO NOT OPERATE FROM GROUND CONTROL STATION WITH PERSONNEL IN THE PLAT
-
FORM EXCEPT IN AN EMERGENCY.
Ground/Platform/OFF Key Selector Switch
The key selector switch on the
Ground Control Station functions
to direct electrical power to the
desired control station. With the
switch turned to the
ground posi
-
tion (1)
, power is supplied to the
controls at the ground control sta
-
tion. When the switch is turned to
the
platform position (2)
, power
is supplied to the controls at the
platform control station. The
switch should be set to the
OFF
position (3)
when not using
machine or parking the machine
overnight.
Platform Lift/Lower Switch
A three-position momentary contact switch con
-
trols raising and lowering of the platform from
the Ground Control Station.
NOTE:
There will be a brief delay between switch
activation and movement of the plat
-
form.
When operating platform from the ground con
-
trols, activate the lift/lower switch to up position and hold to raise plat
-
form, or down position and hold to lower an elevated platform. Release
to stop all movement.
Inverter ON/OFF Switch (If Equipped)
When switched on, the inverter converts the DC voltage stored in the
onboard batteries to AC voltage for use at the AC receptacle outlet
mounted on the platform rail.
1
2
3
To
order go
to
Discount-Equipment.com
