Section 5- Attachments
5
-
13
31211368
Example
A contractor owns a model xxxx telehandler with a fork carriage. The contractor knows
this attachment may be used with his model since:
• The part number on the attachment identification plate matches the attachment part
number on a capacity chart located in the operator cab.
• Attachment style, weight, dimensions and load center match the attachment data on
the capacity chart.
• Capacity chart is clearly marked for model xxxx and corresponds with machine
configuration being used.
Below are examples with various conditions the contractor may encounter and whether
or not the load may be lifted.
Note:
This is a sample capacity chart
only
!
DO NOT
use this chart, use the one located in your
operator cab.
Load Weight
Distance
Height
OK to Lift
1
5750 lb (2608 kg)
25 ft (7,62 m)
10 ft (3 m)
Yes
2
4900 lb (2223 kg)
30 ft (9,2m)
30 ft (9,2 m)
NO
3
8100 lb (3674 kg)
5 ft (1,5 m)
30 ft (9,2 m)
Yes
4
5250lb (2381kg)
15ft (4,6 m)
45 ft (13,7 m)
NO
OD1090
XXXX
Attachment
P/N:
XXXXXXXXXX–xx in.
XXXXXXXXXX–xx in.
XXXXXXXXXX–xx in.
=XXX lbs.
MAX
XX” MAX
XXXXXX XXXXX
Example 1
Example 3
Example 2
Example 4
https://www.forkliftpdfmanuals.com/
