SECTION 3 – MACHINE CONTROLS, INDICATORS AND OPERATION
– JLG Lift –
3-19
Manual Swinging Operating Devices - 10E/26E
The manual swinging operating devices are used in the event
of total power failure to manually swing the superstructure.
Those devices are composed of:
- a
rotary valve (1)
located on the pump/motor control valves
assembly to release the swinging motor (Refer to Figure 3-14.).
- a
pinion (2)
, located below the pump/motor control valves
compartment, that can be operated using the
folding lever
(3)
.
DO NOT RELEASE THE SWINGING MOTOR UNLESS THE MACHINE IS ON A
LEVEL SURFACE.
Figure 3-14. Manual Swinging Operating Devices - 10E
To
order
go
to
Discount-Equipment.com