SECTION 2 - GENERAL
2-4
31215825
Inspection and Maintenance Codes:
1.
Check for proper and secure installation.
2.
Visual inspection for damage, cracks, distortion, or
excessive wear.
3.
Check for proper adjustment.
4.
Check for cracked or broken welds.
5.
Operates properly.
6.
Returns to neutral or "off" position when released.
7.
Clean and free of debris.
8.
Interlocks function properly.
9.
Check for signs of leakage.
10.
Decals installed and legible.
11.
Check for proper fluid level.
12.
Check for chafing and proper routing.
13.
Check for proper tolerances.
14.
Properly lubricated.
15.
Torqued to proper specification.
16.
No gouges, excessive wear, or cords showing.
17.
Properly inflated and seated around rim.
18.
Proper and authorized components.
19.
Fully charged.
20.
No loose connections, corrosion, or abrasions.
21.
Verify.
22.
Perform.
23.
Sealed properly.
24.
Overrides Platform controls.
25.
Inspected per Service and Maintenance Manual.
Footnotes:
(a) Prior to use each day; or at each Operator change
(b) Prior to each sale, lease, or delivery
(c) In service for 3 months; or Out of service for 3 months
or more; or Purchased used
(d) Annually, no later than 13 months from the date of the
prior annual inspection
Hydraulic Fluid ***
11
11
Electrical Connections
20
20
Instruments, Gauges, Switches, Lights, Horn
5,23
5,23
GENERAL
Operator and Safety Manual in Storage Box
21
21
ANSI Manual of Responsibilities and AEM Safety Manual
in Storage Box (ANSI Only)
21
21
Capacity Decals Installed, Secure, Legible
21
21
All Decals/Placards Installed, Secure, Legible
21
21
“Walk-Around” Inspection Performed
21
21
Annual Machine Inspection Due
21
21
No Unauthorized Modifications or Additions
21
21
All Relevant Safety Publications Incorporated
21
21, 22
General Structural Condition and Welds
2, 4
2, 4
All Fasteners, Pins, Shields, and Covers
1,2
1, 2
Grease and Lubricate to Specifications
22
22
Function Test of All Systems
22
22
Paint and Appearance
7
7
Notify JLG of Change in Machine Ownership
22
22
*
Change only when serviced, requires 10 oz. (296cc’s) to fill.
**
Replace after system brush wear indicator warning is activated on Ground Control Station.
*** Drain and refill with fresh hydraulic fluid every two years.
Table 2-2. MVL/MSP - Preventive Maintenance & Inspection Schedule (Continued)
AREA ON MACHINE
INTERVAL
PRE-DELIVERY(b)
OR FREQUENT (c)
INSPECTION
ANNUAL (d)
(YEARLY)
INSPECTION
Go to
Discount-Equipment.com
to
order your
parts
