![background image](http://html1.mh-extra.com/html/oshkosh-corporation/jlg-0300174703/jlg-0300174703_operation-and-safety-manual_1655739103.webp)
SECTION 6 - ACCESSORIES
3121606
– JLG Lift –
6-9
All power regulation components are located in a watertight box
connected by cable to the generator. The generator supplies
power when running at the specified speed with the power
switch on (switch is located on platform). A three-pole, 30 Amp
circuit breaker protects the generator from overload.
Generator Output
ANSI Specifications:
• 3-phase: 240 V, 60 Hz, 7.5 kW
• 1-phase: 240 V/120 V, 60 Hz, 6 kW
CE Specifications:
• 3-phase: 240 V, 7.5 kW, 18.3 A, 1.0-pf
• 1-phase: 240 V, 6.0 kW, 26 A, 1.0-pf
• 1-phase: 120 V, 6.0 kW, 50 A, 1.0-pf
Peak:
• 3-phase: 8.5 kW
• 1-phase: 6.0 kW
Accessory Ratings
• 3000 rpm (50 Hz)
• 3600 rpm (60 Hz)
Safety Precautions
DO NOT OVERLOAD PLATFORM.
• Ensure no personnel are beneath platform.
• This factory-installed option is available only on specified
models.
• Keep lanyard attached at all times.
• Do not use electrical tools in water.
• Use correct voltage for tool being used.
• Do not overload circuit.
Preparation and Inspection
• Ensure generator is secure.
• Check condition of belt and wiring.
Operation
Start the engine, then turn on the generator.
Refer to the Miller Generator Technical Manual (PN 3121677) for
more information.
To
order go
to
Discount-Equipment.com