CAS40P 40 CFM / 100 PSIG
SECTION 8: ILLUSTRATED PARTS LIST
PAGE - 65
®
An Oshkosh Corporation Company
8.1 PARTS ORDERING PROCEDURE
Part orders should be placed through the distributor
from whom the unit was purchased. If for any reason
parts cannot be obtained in this manner, contact the
factory directly at the address or phone numbers
below.
When ordering parts always indicate the
Serial Num-
ber
of the machine package. This can be obtained
form the Bill of Lading for the machine package, or
from the compressor unit serial number plate. See
Figure 8-1
for location of machine package serial
plate. Consult
Table 8A: Recommended Spare
Parts List
on the next page for a listing of replace-
ment parts.
SECTION 8:
ILLUSTRATED PARTS LIST
IOWA MOLD TOOLING CO., INC.
500 Highway 18 West
Garner, Iowa 50438
Phone: 641-923-3711
Fax: 641-923-2424
www.imt.com
Figure 8-1: Machine Package Serial Plate and Serial Number Locations
PSIG
PSIG
Manual #99905382 Rev 02
(JUNE 2018)
Summary of Contents for IMT CAS40P
Page 119: ...BLANK PAGE...
