Unpack and Installation
4
Chapter 2 Unpack and Installation
Unpack:
When unpacking the WVT-501, pleased verify that none of the components listed in
Table 3.1 are damaged or missing. If there are any components missing, please
contact your distributors or OSEE for it.
Table 2-1 Packing List2
No.
Item
Quantity
1
WVT-501 Transmitter(with battery plate)
1
2
WVT-501 Receiver(with battery plate)
1
3
Antenna
8
4 User
Manual
1
5
Warranty Card
1
Installation:
1.
Prepare for installation
Please follow the procedures below before installing WVT-501:
y
Check the package and equipment for any visible damage that may have
occurred during transit.
y
Confirm all the items listed on the packing list have been received.
y
Remove all the packing material including electrostatic-resistant packing.
y
Retain these packing materials for future use.
2.
Connect the antennas to the top side of the unit, each needs four
antennas, as shown in Figure3-1. Put the antennas as fan arrangement to
transmit or receive signals more steadily.
3.
Connect required signal cables to the corresponding interfaces.
Figure 2-1 Antenna Interfaces
4.
Connect the 7
～
17VDC power source to DC IN interface.