Chapter 2 Installation
HDC6831N HD-SDI Downconverter / Demultiplexer /Audio and Video Monitor 9
Step 4
Step5
Fig. 2-1
Installation of 2U Frame of 6800N Series
Locate the position for back connector and insert the back connector
Fasten the screw to fix the back connector.
Locate the slot for module.
Get the module installed in the slot, push the module slightly along the slot, press module again
to confirm that the module is installed firmly and then close swivel handle.
Install the front panel.
2.5 Making the Connections
Please connect signals based on Fig. 1-2.
2.6 Removing the Module
Follow the following steps to remove HDC6831N module:
1.
Open the front part of frame.
2.
Open the swivel handle to the full.
3.
First make sure the frame stands firmly, and then pull the module gently along the slot till
out of frame.
4.
Install the front panel.