OSEE HCM-700, User Manual, Page: 57 / 75

Scenes and Tools
51
Select SDI METADATA

Timecode item to enable the display of embedded
timecode on screen, only valid for SDI input signal.
Timecode is displ
ayed as the format of “HH:MM:SS:FF” at the bottom center of
the screen, and if there is no available timecode, it will not appear.
Figure 5.1-22 Timecode
5.1.5
Scale Tools
Scale tool is used to adjust the horizontal and vertical size of the screen, as shown in
Figure 5.1-23
Figure 5.1-23 Scale Tools
Table 5.1-6 Description of Scale Tools
Tool Items Default Domain Range Description
SCALE
ENABLE OFF OFF
/
ON
Enable/Disable image
scale function
SIZE 75 20～100 Set image display size
LOACTION TOP LIGHT

TOP RIGHT

MID RIGHT

BOT RIGHT

MID BOT

BOT LEFT

MID LEFT

TOP LEFT

TOP MID

CENTER
Set image position on
screen
1.
IMAGE SCALE

Activate Image Scale Function