OSEE ADC6820N, User Manual, Page: 15 / 23

DC6820NXX AUDIO A/D CONVERTER USER MANUAL
- 11 -
Fig. 3-1
Switches and key
Rotate SW1 at the position of 0, and select the proper Bank by SW2.
Bank Selection
The SW1 has two Banks
Rotate the SW1 at the position of “0”. The position of “0” is always used to select Bank.
Turn SW2 up or down to select Bank.
1. SW1 Mode Selection
SW1 is a 16-position rotary switch, which is used to select the specific setting.
The selection range is: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F.
2. SW2 Mode Selection
SW2 is a toggle switch, which is used to decide the concrete figure of the setting made by SW1.
SW2 is a 3-position toggle switch, used to decide the concrete figure of the setting made by SW1.
To keep SW2 at the position of “UP” or “DOWN”, the continuous adjustment can be achieved.
3. SW3
Press the SW3 to activate OSD.
SW1
SW2
SW3