C.ITOH CI-5000 Dot Matrix Printer
OSE
Display Codes for DEC Emulation
The following codes and numbers differ from IBM and Epson emulation, but all other
codes are identical.
1.
Place printer in either SET-UP or CONFIGURATION mode.
2.
Press FORM FEED button to enter User Number selections. Choose a User
Number.
Note: Numbers 0 through 2 are stored in non-volatile memory where con-
tents are not lost when printer is turned off. User Number 3 is a "scratch" list
designed for frequent temporary changes.
3.
Press FWD LN FEED button to access Attribute Field Selection and choose
"00"(EMULATION mode) and menu item "01" (IBM/EPSON EMULATION
mode).
4.
Choose attribute field "01" (Emulation level); choose menu item "02" (Epson
FX-286e Emulation)
5.
Press QUIET/SET-UP button to exit session.
Display Codes for Epson Emulation
The following codes and numbers are different from IBM and DEC emulation, but all
other codes are identical.
Code
Description
Function
Protection Type
Notes
02
42/RESTRT-L
Restraint Low,
RS232 pin 11
Code
Description
Function
Protection Type
Notes
03*
42/XON/XOFF
XON/XOFF
01
Emulation
Mode
Establishes DEC
printer type.
Unprotected
Enhanced
instructions
have been
set to the
emulations.
04
42/DTR
DTR protocol pin 20
goes BUSY when
only buffer space left
is the overrun buffer;
READY when buffer
level returns to free
space of at least 1K
bytes plus overrun
buffer size.
Code
Display Reflects
Description
01*
01/LA210
Relates to Level 2
commands and
Level 1 commands
plus the C.Itoh
enhancements.
43
Stop Bits
Establishes number
of stop bits in each
serial data frame.
This field will only be
displayed in CON-
FIGURATION mode.
02
01/LA210 ID
LA75 emulation,
Level 2 operation.
Relates to Level 2
commands and
Level 1 commands
plus the C.Itoh
enhancements.
Allows for a LA210
ID to host upon
request for identifica-
tion.
Code
Display Reflects
Description
01*
43/1 bit
1 stop bit used.
(default)
02
43/2 bit
2 stop bits used.
44
Parity
Establishes parity to
be used.
This field will only be
displayed in CON-
FIGURATION mode.
When field
41 is estab-
lished at 8
bits, Mark
and Space
are treated
as No Parity.
03
01/Level 2 ID
LA75 emulation,
Level 2 operation.
Relates to Level 2
commands and
Level 1 commands
plus the C.Itoh
enhancements.
Allows for a LA210
ID to host upon
request for identifica-
tion.
Code
Display Reflects
Description
01*
44/No Parity
No Parity
02
44/Odd
Odd Parity
03
44/Even
Even Parity
04
44/Ignore
Ignore Parity
45
Baud Rate
Establishes data
transmission rate for
serial interface
This field will only be
displayed in CON-
FIGURATION mode.
04
01/Level
LA75 emulation,
Level 1 operation:
LA50 printer emu-
lation plus response
to C. Itoh enhance-
ments.
Code
Display Reflects
Description
01
45/9600 BPS
9600 Baud
02
45/4800 BPS
4800 Baud
03
45/2400 BPS
2400 Baud
26
Define Char-
acter Set GL,
G0
Establishes char-
acter set for GL, G0
Unprotected
04
45/1200 BPS
1200 Baud
05
45/600 BPS
600 Baud
27
Define Char-
acter Set G1
Establishes char-
acter set for G1
06
45/300 BPS
300 Baud
07
45/19200
19200 Baud
28
Define Char-
acter Set
GR, G2
Establishes char-
acter set for GR, G2.
Unprotected
29
Define Char-
acter Set G3
Establishes char-
acter set for G3
Unprotected
40
Interface
Allows selection of
communication inter-
face.
This field will only be
displayed in CON-
FIGURATION mode.
Code
Display Reflects
Description
01*
40/Centronics
Establishes
Centronic parallel
port
02
40/RS-232C
Establishes RS-232C
serial interface.
03
40/RS-423A
Establishes RS-423A
Serial interface.
Code
Description
Function
Protection Type
Notes
41
Data Bits
Establishes serial
interface data length.
This field will only be
displayed in CON-
FIGURATION mode.
01
Emulation
Mode
Establishes Epson
FX-286 printer type
Unprotected
Enhanced
instructions
have been
set to the
emulations.
Code
Display Reflects
Description
01
41/7 bits
7-bit data length
27
Define Char-
acter Set
Determines interna-
tional characters to
use
Unprotected
02*
41/8 bits
8-bit data length
42
Serial Inter-
face Protocol
Establishes Serial
Protocol type
This field will only be
displayed in CON-
FIGURATION mode.
28
Graphics
Character
Determines italics or
graphic characters
Unprotected
Code
Display Reflects
Description
40
Interface
Determines commu-
nication interface.
This field will only be
displayed in CON-
FIGURATION mode.
01
42/RESTRT-H
Restraint High,
RS232 pin 11
4
CI-8
IBM/TSS Internal Use Only
