22
• Lying down
• Reclining
• Sitting
To adjust the frame, simultaneously press both the white
knobs on the frame mounting. Now you can adjust the tilt
angle of the frame. The frame will perceptibly snap into
one of the three possible positions.
c.) Removal
Bring the frame into a horizontal position. Simultaneously
push both the white knobs on the hinges of the pushing
handle. Now lift the frame vertically upwards, the frame
mounting will slide out of the insertion slots.
6.) Carrying handle
The carrying handle is attached centrally to the frame.
To attach press both the white knobs at the ends of the
handle, keep these pushed down and then insert the
handle into the lugs, on the left and right of the frame. As
soon as you hear a clicking sound the carrying handle is
locked in place, and can be used.
To remove the carrying handle, push both the white knobs
at the ends of the handle simultaneously and pull it verti-
cally upwards.
7.) Soft carrycot
For use as a pram (from birth up to about 6 months) install
the soft carrycot into the frame.
Hang the soft carrycot in the frame and fasten it with the
Velcro strips. To maintain a rigid construction, proceed
from the outside inwards: first attach the Velcro strips at
the head and feet ends, then the bands next to them, left
and right, at each end, finally the fasteners in the middle.
Now fasten the soft carrycot to the chassis and hang both
the suspension straps in the notches provided on the
frame mounting.
II. Montage
16
17
-
18
19
-
20
24
-
Text_alle_black.indd 22
02.02.2010 11:23:26 Uhr
