Keeping
27
Trouble-Shooting
●
●
●
●
●
●
●
●
●
●
●
During the course of the chair's life span, certain symptoms may arise which
are perfectly normal. These are normal things to expect as the chair is used
more and more. Here are few of the symptoms that can me expected.
Sounds from massage
heads slightly louder as it
mov
es. Maybe resolved by
greasing the backrest assembly.
Sounds from gears and motors
will get a little louder
.
Tightening of bolts may
reduce the sound.
Sounds from frictions between massage balls and covers of massage
chair (esp.from KNEAD massage).
Sounds from TAPPING and WAVELET
action as it moves from top to bottom.
The speed of the massage may slightly change over the years as the motor will start
to weaken in the later time of the chair's life expectancy.
When the speed varies in the massage their may be a slight sound change.
Sounds from motor
s will increase as the barrier and gears begin to wear.
When conducting the body scan, as the rollers move from top to bottom the joints
may produce a clicking sound as the springs and joints begin to wear down.
Sounds from air inflation and deflation
will be come louder.
Sounds from air bag inflating
may change as the airbags stretch out over time
.
As the chair reclines the may be a noticeable sound. Greasing the joint may reduce the
sound.
The massage heads in the back may be at slightly different levels due to years of stress
and pressure.
●
Warnings
Do not dismantle, repair
or
tamper when this symbol is
displayed. This should
only be handled by
certified techs. Warranty
will void not followed.
Is the power switch in the back of
the armrest switched on?
Is the backrest pressing against the
wall?
When the massage heads encounter
an extreme amount of resistance or
force teh chair safety feature will
cause the chair to shut down. If the
person exceeds the weight capacity it
will no operate.
IS the chair properly plugged in?
Does the rear of the backrest
touch the wall or other objects?
Make sure the outlet has power.
Check the fuse on the chair
If so please be sure the proper
amount of distance is provided for
the chair to operate properly. If the
backrest is pressed against the wall
the chair will stop functioning.
Try restarting the chair by powering
off from the back of the chair. If the
chair has beeing operating for more
than an hour, allow for the chair to
cool down for 30 minutes while
unplugged.
Insert the plug into the socket
Check the remote to make sure none of
the buttons are in the stuck position.
Troubles
10
10
7、10、11
10
10
7
No Power
to the chair
Stop
s
during the
massage.
The
remote
control
doesn't
work)
The recline
is not
working
Where to be Check
Measures
Reference Page
Is the plug firmly in the oulet?
When the screen of remote control displays ERROR, switch off the power and switch on again.
Then, press “ON/OFF” button to start.
※
If
the chair is not working still, remove the plug from the outlet and let it rest for 30 min. If it still
does not work leave it unplugged and contact the manufacturer.