21
22
Synthetic leather
●
Clean with tidy, soft and dry cloth slightly.
(
Chemical
or
medical
cleaning
products
are
forbidden
)
1
Dip soft cloth into 3-5% neutral detergent
solution, squeeze it then clean the stain on
the surface gently.
Wash cloth, squeeze it and wipe with
detergent.
●
2
General cleaning
If leather is dirty
Clean it softly with dry cloth.
allow to dry (air blower is prohibited)
●
3
●
1
Dip cloth into weak neutral
detergent, squeeze it and clean
the material surface.
(
Diluent
,
gas
,
alcohol
are
prohibited
)
Brush the dirty parts with weak
neutral detergent. (avoid excessive
brushing)
Excessive cleaning may cause
damage to cloth material.
Wipe with water-dipped but
squeezed cloth.
Allow to dry.
●
2
●
3
●
4
●
4
●
1
Dip cloth into neutral detergent,
squeeze it and clean.
Wipe with water-dipped but
squeezed cloth.
Allow to dry.
●
2
●
3
●
1
Wipe with soft cloth after squeezing.
Allow to dry.
●
2
About cleaning
Clean and Maintenance
Clean the controller
Plastic parts
Cloth mate ri al
M
a
in
te
n
a
n
c
e
Before cleaning, unplug the electricity,
don
'
t touch plug with wet hands.
Make sure hands are dry when plugging
to the socket.
If failed to follow the mentioned instruction,
user may get electric shock or burned.
Propellant, diluent or
alcohol are prohibited.
●
1
●
2
●
3
●
2
●
1
remote control
●
1
●
3
Malfunction analysis
malfunction analysis
O
h
e
t
rs
Note: If the troubles are not caused by above reasons, please turn off the power switch and
cut off the power, then contact the manufacturer or service agent to repair your chair.
Trouble
Possible reason
Troubleshooting
The mass age chair can't
work after powe r is on.
Massage function suddenly
stops while working.
Check if the control is on or not.
Setting time is up.
Open control switch
Not choose massage function
Choose massage function
Normal sound, no need to pay
attention to it.
Normal, no need to pay attention to it.
Turn off the power to have the
massager rest for over half an
hour before next turn working.
connect the electricity power again
Check whether the plug and socket
in poor contact.
It is sound of air pump, motor and
mechanical parts.
Inner parts fretted away due to long
time work. It’s normal
Sound suddenly becomes
much louder while working.
Remove the obstacles; turn off
the power to have the massager
rest for over half an hour before
next turn working.
Check if there are any obstacles; the
chair overloads; for the sake of safety,
sometimes the massage machine may
automatically stop working.
Neither the backrest nor the
legrest can be lay down.
Please ask manufacturer or appointed
or authorized maintenance man for
checking and replacement.
Excessi ve oper ation; setting time is up.
The chair can't return to its
original position.
Massage rollers work on shifts.
Different height of the left
roller and right roller.
Make sure plug and socket are connected.
Controller gives out heat
Stop using it,if it gives too much
heat . Turn to assigned repai r
divison for help.
Caused by long time using
There is beep sound inside
the massager while working.
Check if it is due to long time working.
Please ask appointed or authorized
maintenance man for checking and
repairing.
Electric wire or plug
give out heat
Turn off the power to have the
massager rest for over half an
hour before next round working.
Wire or plug has damaged.
Please ask manufacturer or appointed
or authorized maintenance man for
checking and replacement.
The fuse burned out.
Replace fuse of same specification.
Something wrong with inner circuit
Please ask appointed or authorized
maintenance man for checking and
repairing.
Suddenly power-down
Turn off the power to have the
massager rest for over half an
hour before next turn working.
Stop using
，
and ask appointed
maintenance man for help.
It may work overload
other abnormal case