3
PXG20Y05
Handling precautions
■
This product has a special treatment on the screen surface to enhance the projection effect.
Note the following points and handle them carefully, as dirt and scratches may damage the
projection effect.
●
Do not touch the screen surface.
●
Do not draw characters or pictures on the screen surface.
●
Do not rub or scratch the screen with a hard object.
●
For maintenance the screen, refer to the included manual "Screen materials".
■
The screen smells when you start using it. Ventilate the room enough by opening
windows. Ventilation lessens the odor gradually.
■
Keep sharp blades or sharp metal objects away from the screen.
●
Not only it impairs the projection effect, but it causes damage.
Installation precaution
■
To ensure the performance of the projection screen and prevent troubles, do not
install it in the following locations.
・
Places where vibration or shock may occur.
・
Places near sources of magnetism, heat, steam, oily smoke, etc.
・
Places where hit the wind from heating equipment.
■
Install according to the structure and material of the installation area.
■
Use a soft blanket or cloth to prevent the product or floor from being scratched during
installation work.
■
Be careful not to lose tighten or over tighten the screws.
■
When installing, pay sufficient attention to ensure the safety for surrounding.
■
When working at high places, ensure the safety of your scaffolding and wear protective
equipment properly before starting work.
■
Install the product as horizontally as possible.
■
We are not responsible for any accidents or damages caused by
improper handling or natural disasters.
●
The installation surface of this machine must be strong enough
to support the screen mass for a long time.
If the installation surface is not strong enough, the machine
may fall off.
●
Be sure to perform installation work with two or more workers.
