background image

PoolStar

 3000 

Instructions for the Through 

 The Wall Above Ground Pool Light 

 

 

4

 

 
 
 

FOR EVERY ABOVE GROUND POOL 

“THERE IS LIGHT” 

 
 

*ETL LISTED 

*ONE YEAR WARRANTY 

*EASILY CUSTOMIZABLE 

*LOW COST 

*EASY TO INSTALL 

*LOW VOLTAGE 

 

 

Summary of Contents for PoolStar 3000

Page 1: ...pool of the body Hand tighten firmly Fill pool with water to check for sufficient seal before proceeding The combination you should now have is Body Gasket Pool side Liner Gasket and DNL Cap 4 The DNL Can has a Ceramic Socket with a 12 volt Light Cord and a halogen reflector already installed Take the DNL Can and install bulb The pins on the bulb are universal There is no right or wrong way of ins...

Page 2: ...bulb is attached to the socket by two male prongs extending from the bulb that connect to two female ports on the socket 4 Pull gently on the bulb to remove it 5 Take new bulb and insert it into the socket The tabs are universal So there is no right or wrong way of inserting the bulb into the socket Push male end tabs on bulb into the female ports on the socket 6 Take the DNL Can and push it back ...

Page 3: ...h the mounting tab of the Power Supply and around the bail carriage handle 3 Insert the male end of the zip tie into the locking buckle Pull the male end through the buckle to form a large loop You will have approximately 1 of tie exposed Do not cinch the zip tie completely down 4 Repeat steps 1 through 3 for second zip tie installation The PoolStar 3000 is to be installed according to the manufac...

Page 4: ...olStar 3000 Instructions for the Through The Wall Above Ground Pool Light 4 FOR EVERY ABOVE GROUND POOL THERE IS LIGHT ETL LISTED ONE YEAR WARRANTY EASILY CUSTOMIZABLE LOW COST EASY TO INSTALL LOW VOLTAGE ...

Reviews: