manualshive.com logo in svg

Oru Kayak BAY, Assembly Manual

Share
Download
Oru Kayak BAY Assembly Manual Download Page 20

CARING FOR YOUR ORU KAYAK

•  Inspect your kayak before each use 

to make sure it is not damaged, 
and that all fasteners are tight.

•  Rinse off your kayak with clean, 

fresh water after each use, 
especially after paddling in salt 
water.

•  Make sure water does not collect 

inside the kayak case after use.

•  Some water may collect inside 

the plastic corrugations. To let it 
escape, flip the unfolded kayak 
upside down to let it drain out.

•  For additional cleaning, use 

general-purpose cleaning spray 
with a soft, non-abrasive rag or 
sponge.

•  In case of serious damage or 

punctures, email us at  

 

[email protected].

0815 © 2015 ORU KAYAK, INC. ALL RIGHTS RESERVED

Kneel on the folded box to compress it. 
Clip and tighten the two sets of outside 
deck buckles on either side.

Stash loose components in the box, 
along with any extra gear. Place the 
floorboard over the top of the box. 

Place and tighten the shoulder strap 
loops over the box as shown .

All packed up and ready to go!

11

12

Folding the Oru Kayak back into the box

STASH
ORU KAYAK 
COMPONENTS 
HERE

13

14

Summary of Contents for BAY





















Reviews:

No comments

Brands by name

Popular brands

Load more brands