1. Purpose
The GBD-R detector (hereinafter referred to as the “detector”) is designed to detect the break-
ing/destruction of sheet glasses installed in the interior of protected objects and transmit this
events to the Lun-R receiver that is connected to the Lun control panel (more about for compatibil-
ity, see the documentation of the relevant control panel).
Product is not equipped with built-in cameras and microphones, devices and units for
hidden video and audio recording.
2. Safety Precautions
Only the employees, familiar with the module design, instructed on the safety arrangements
shall be allowed to install, routinely maintain and repair.
The device does not have open live parts, representing the danger of electric shock to a per-
son. No safety ground.
3. Technical specifications
The detector technical characteristics is shown in the Table 1.
Table 1. Technical characteristics
Characteristic
Value
Operating frequency range (depends of modification), MHz
433.05…434.79 or
868.70…869.20
Power radiated by the transmitter, mW
up to 10
The health test signals period, seconds
60
Range, m
6
Viewing angle
120º
Preparation time, s
30
Sensitivity, db
80±3
Main power source type
CR123A battery
Backup power source type
CR2450 battery
Battery voltage, V
2.2…3.2
The battery predicted service life, years
up to 5
Degree of protection provided by enclosure
IP30
Dimensions, mm
100*50*40
Weight, g
100
GBD-R
Version en_2
3
