Dongguan Ortur Intelligent Technologies Co., Ltd.
www.ortur3d.com www.ortur3dprinter.com
No.27, Second Industrial Park, Heshi Road, Qiaotou Town, Dongguan 523527, Guandong Province, China
13
3.5 “Preheat ABS” Menu:
In the “Temperature” Menu, the Fifth Option is “Preheat ABS” Menu.
If the filament is ABS, you could go to this Menu to use these commands to preheat the ABS filament
directly.
3.5.1 “Preheat ABS” C 3.5.2 “Preheat ABS End” C 3.5.3 “Preheat ABS Bed” Command:
It’s same Operation as {“Preheat PLA” Command}.
4. “Configuration” Menu:
In the Main Menu, the Fourth Submenu is “Configuration” Menu. Press the Control Button to go to this
submenu.
4.1 “Advanced Settings” Menu:
In the “Configuration” Menu, the First Option is “Advanced Setting” Menu. Press the Control Button to go to
this menu.
