6
Dongguan Ortur Intelligent Technologies Co., Ltd.
https://ortur.tech/obsidian
No. 56 Maxin Road, Changping Town, Dongguan 523565, Guangdong Province, China
LaserGRBL
1. Launch
LaserGRBL
software;
Note:
We would recommend updating to the latest version as well. LaserGRBL
4.0.0 is the latest version at the time of writing of this guide
2. Select the appropriate COM port for your
Ortur Laser Master M400 v1
and press
Connect
button;
3. Once connection is established, console window will show the welcome
message;
4. Confirm that the welcome message shows
OLF 140
as latest firmware. This
confirms the update procedure was successful.
5. Although probably not necessary, click the “Padlock” button to clear any possible
errors and set the motherboard into listening mode;
6. Above console window, where
LaserGRBL
has a input box saying (Type Gcode
Here) enter the following command:
$RST=*
and press the
Enter
key;
