29
28
35
3.2.6.11 Depth-adjustment of calf
pads (774-1)
The depth of the calf pads can be al-
tered by assembly at two other screw-
on positions (fig. 35/
➁
). Tighten the
locking screws (fig. 37/
➂
) after the
adjustment.
3.2.6.12 Depth-adjustment of calf
pads (774-2 AL)
The depth of the calf pads can be al-
tered by assembly at two other screw-
on positions (fig. 36/
➁
). Then tighten
the clamping screw (fig. 37/
➂
).
36
3
37
2
2
1
33
32
3
2
3.2.6.9 Angle-adjustment of foot
plates (774-2 AL)
After removing the locking screw (fig.
32/
➁
), pull out the teeth and set the
angle of the foot plate. Re-tighten screw.
The tightening torque is 6 Nm.
The regulating screw (fig. 32/
➂
) is used
to correct the angle of the foot plate in
a crosswise direction.
3.2.6.10 Height-adjustment of
calf pads (774-1)
The height of the calf pad can be al-
tered after the locking screw (fig. 33/
➀
) has been slackened.
Re-tighten screw.
