Genufit 25 · Genufit 27 · Genufit 29 · Genufit 30
Fully open the securing straps, pull out of the appropriate loop and release the
Velcro
®
closure from the knee brace. Pull the knee brace over the knee so that
the orange label is facing upwards (fig. A). The cut-out on the front must
lie precisely over the knee cap.
Genufit 25A · Genufit 27A · Genufit 29A · Genufit 30A
Open the securing straps, pull the tapes out of the appropriate loop and release
the Velcro
®
closure from the knee brace. Position the knee brace on the extended
knee in such a way that the orange label faces upwards. The cut-out on the front
should be located over the knee cap as precisely as possible. Secure the
Velcro
®
closures (inner one first (fig. B and C), then the outer
Velcro
®
closures (fig. D and E), always start with the topmost closure).
Guide each strap through the appropriate buckle and tighten the Velcro
®
closure
until the desired tension is achieved, than secure. First close the straps at the
thigh (fig. F and G), then at the calf (fig. H). For the longer versions of the
knee brace (REF. G1127, REF. G1127A, REF. G1130 and REF. G1130A) first close
the distal strap (the one furthest from the centre of the body) at the thigh.
P U T T I N G O N T H E A P P L I A N C E F O R T H E P A T I E N T
1
2
English
A
B
D
C
E
F
H
G
English
