Open all Velcro
®
closures and provisionally close them on themselves.
Genufit 08 · Genufit 15
Pull the knee brace over the knee so that the orange label is facing
upwards (fig. A) and the patella cut-out is located above the knee cap (fig. B);
the guides/joint braces should be parallel to one another.
Genufit 08A · Genufit 15A
Pull the knee brace on in such a way that the orange label is facing upwards and
the patella cut-out is located over the knee cap; then fasten the inner Velcro
®
closures (fig. C and D) and the outer Velcro
®
closures (fig. E and F).
Genufit 15 · Genufit 15A
If necessary, remove the knee brace, take the joint braces out of teh pockets and
bend to correspond to the shape of the leg (fig. G). Then replace the joint braces
back in the pockets and put the knee brace back on again.
Pull the two Y-shaped ends of the upper strap through the appropriate strap
guide, pull firmly, simultaneously with both hands and then secure the Velcro
®
closure (fig. H). Repeat this process for the lower strap (fig. I).
A D A P T I N G F O R T H E D O C T O R / T E C H N I C I A N
1
2
3
4
English
A
B
C
D
E
F
H
I
G
English
