IV.
OPERATING YOUR SCOOTER
1, BEFORE OPERATION
1). Insert the power key into the switch lock and turn clockwise to the
ON position.
2). Check the battery charge indicator to make sure the batteries are
fully charged.
3). Make sure that clutch lever is at close position.
2, TURN POWER ON
Insert the key into the key switch on the upper tiller and rotate
clockwise to the “ON” position.
3, FORWARD MOTION
To move forward, pull the right thumb lever under the control
console forward. The further you pull, the faster the scooter will go.
The maximum speed may be selected by the speed selection switch
located on the top of the control console.
3. REVERSE MOTION
To reverse, pull the left side of the thumb lever under the
control console forward. Reverse speed is limited to 3 mph (4.8
km/h).
4. STOP
To stop the scooter, just release the thumb lever. The scooter will
quietly come to a smooth stop and electromechanical brake will
automatically engage to hold the scooter in position on horizontal
surface or an incline of up to 12 degrees, with a load of no more than
275 lb. (125 kg). Quick smooth stops are made possible by the
dynamic braking feature built in the controller.
5
