Wireless Multimedia Keyboard And Optical Mouse
9
About the
function
This function will be changed when the status alter, as below:
status “ON”
→
When you press the
key, you can input the “
€”.
status “OFF”
→
You can change the “Num Lock” status.
3. Setting Wireless Multimedia keyboard and Program
A. Make sure the receiver cable (purple) is plugged into the PS/2
keyboard port and the other cable (green) is plugged into the PS/2
mouse port.
B. Establish communication between the receiver and keyboard. The
bottom of the receiver and keyboard both has an ID setting button.
Press the ID button on the receiver first; then the receiver’s LED will
flash (about 0.5 second glitter one time). Then press the ID button
under the keyboard. The receiver’s LED will stop flashing; it means
the keyboard’s setting up is completed.
NOTE: When you replace
the batteries, remember to reset again!
