08
is in low volume and you have to charge.
3.Channel choosing,O2 systems’pre-set channel is
3.Charging, put the USB plug into the transmitter and
channel A,after showing battery volume the A LED will
flash,it indicates making pairs,if transmitter and receiver
connected successfully the channel LED will stop
flashing and turn solid green. if environment interuption
happens, you can click the “C” button to choose
receiver meanwhile, the A B C D LED will light on
orderly according to the batteries’ volume.
another channel.
3. Channel Selection: The system‘s preset channel is
channel A. After indicating the battery life, the A LED
will flash. If the transmitter and the receiver are
connected successfully the channel LED ( of the
channel you have selected) will stop flashing and turns
solid green. If there is an interruption through the
environment, you can click on the “Channel” button to
choose another channel.
4. Charging: Put the micro USB plugs into the transmitter
and receiver. After that, hook up the standard USB end
with a energy souce like your PC or a powerbank.
While charging the A B C D LED will all light up
indicating the status of the overall battery charge.
