Fireplaces
MODEL
LEDFP-3-43 | LEDFP-3-50 | LEDFP-3-60
Instruction Manual
RECESSED TO WALL INSTALLATION
1-888-543-6473
1-888-541-6474
13376 Comber Way
Surrey BC V3W 5V9
[email protected]
www.ortechindustries.com
375 Admiral Blvd
Missis
s
auga
,
ON L5T 2N1
Step 4
Step 5
-1
Step
5-2
Step
6
Step 4
Fix the metal brackets
to the
BOTTOM and to the TOP of
the fireplace box
(see also
Step
4
,
Step
5-1
and
Step 5-2
)
*Reminder
Metal brackets can be used
as movable, please adjust
to the best location as
needed
Step 5
-1
Have two adult people to lift of
the fireplace box and put it
inside of the wall opening hole.
Using the screw driver to fix all
wood screws and drywall
anchors through the metal
brackets to the wall and
fixing tightly.
*Reminder
Make sure that all screws
and drywall anchors are
well screwed.
Step
6
Your Electric fireplace will be
looking like
Step 6
drawing
after the installation
Step 5-2
WALL MOUNTED INSTALLATION
Due to the many different materials used on different
walls, it is highly recommended that you consult your local builder
before you install this appliance on the wall.
1. Select a location that is not prone to moisture and is located at least 36" (914mm) away from combustible materials such
as curtain drapes, furniture, bedding, paper, etc.
2. Have two people hold the appliance against the wall to determine the final location
3.
Place unit face down on a soft, non-abrasive surface.
Remove the bracket from the back of the unit by
removing the screws
