ORTEC RADEAGLET, User Manual

Page: 25 / 60

Green box
• A 2D plot of counts (y-axis) versus channels (x-axis) or energy (x-axis). You can toggle between
channels and energy, using the button ENERGY or CHANNELS . The plot represents the spec-
trum of the radiation.
Blue box
• Data representation ( LIN , LOG or SQRT )
• Length of the spectrum (2048).
Red box
• Dose rate (DR) in rem or µSv/h
• Real/live time (RT and LT)
• Gamma counts (GAMMA) in cps
• Gross-counts (GrossC)
• Dead time (DT)
Figure 16: Spectrum Mode
3.3.2 Perform a Manual Acquisition
In SPECTRUM MODE you can perform a spectrum acquisition. The menu bar at the bottom of the screen
changes whenever you press NEXT . Navigate through the whole menu to get familiar with the menu
structure by repeatedly pushing NEXT . Press START to begin the acquisition and STOP to halt it again.
Use the CLEAR button to delete the current spectrum.
© innoRIID GmbH RADEAGLET User Manual• Software 2.1.16 • Document 1.32o • 2017-12-15 Page 25 of 60