ORTEC radEAGLE User Manual Download Page 60

Page: 60 / 147

5.11 USB Connections

radEAGLE

User Manual

Figure 60:

Data transfer complete

5.11.3

USB Ethernet Adaptor

This item is available while a USB to LAN adaptor is plugged into the

radEAGLE

’s USB-

A port.

The

radEAGLE

connects to a Local Area Network and obtains an IP address from the net-

work’s DHCP server.

This screen shows information about the status of the Web interface and the IP address to
connect to from the Web browser (Fig.

, p.

Ethernet Connection

Figure 61:

Ethernet LAN connection information

Settings and Commands

On • Oﬀ

Switch the Web interface (see

, p.

) on or oﬀ.

Exit

Return to the superior screen.

60/147

Software 3.2.12 • Document 3.3.0o

© innoRIID GmbH • 2019-04-11

Summary of Contents for radEAGLE




















































































































































Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands

ORTEC radEAGLE, User Manual

Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands