ORTEC radEAGLE User Manual Download Page 50

Page: 50 / 147

5.5

Feedback

radEAGLE

User Manual

Dose Unit

Specify the unit for the display of dose values in all measuring modes or other opera-
tions of the

radEAGLE

Sievert

Sievert is a derived unit according to the International System of Units and the
legally prescribed unit in many jurisdictions.

rem

Röntgen equivalent in man. Sievert is the acknowledged international unit, but
many users are familar with doses stated in rem, mrem, µrem.

1 Sv = 100 rem

Exit

Return to the superior screen.

Down

Highlight the next item. Cycles to the top item after you reached the last item.

Change

Edit the highlighted setting.

5.5 Feedback

This screen (Fig.

, p.

) groups several options for the annunciator of your

radEAGLE

Figure 45:

The feedback settings

Settings and Commands

Speaker

Switch the speaker on or oﬀ. This aﬀects warning and alarm reporting.

Vibrator

Switch the vibrator on or oﬀ. This aﬀects warning and alarm reporting.

Button Tone

Specify whether the

radEAGLE

should echo all your key presses with a beep.

50/147

Software 3.2.12 • Document 3.3.0o

© innoRIID GmbH • 2019-04-11

Summary of Contents for radEAGLE




















































































































































Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands

ORTEC radEAGLE, User Manual

Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands