ORTEC radEAGLE User Manual Download Page 27

Page: 27 / 147

radEAGLE

User Manual

Using the

radEAGLE

Figure 14:

Entering the password

Use the keys

for L,

for C, and

for R to enter the ﬁve-character password of L,

C and R.

The factory password is always

L C R L C

Change your password (see

5.23

, p.

) after receiving the instrument to prevent

unauthorized persons from manipulating the protected settings.

After pressing ﬁve keys the available commands change (Fig.

, p.

Figure 15:

After entering the password

Settings and Commands

Repeat

Repeat the entry in case you are not sure whether you pressed they keys in the correct
sequence.

Cancel

Cancel the password entry and quit accessing the protected settings.

© innoRIID GmbH • 2019-04-11

Software 3.2.12 • Document 3.3.0o

27/147

Summary of Contents for radEAGLE




















































































































































Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands

ORTEC radEAGLE, User Manual

Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands