ORTEC radEAGLE User Manual Download Page 16

Page: 16 / 147

1.5

The

radEAGLE

User Manual

1.5.3 Hardware Accessories

The

radEAGLE

is delivered with comprehensive accessories. The list of accessories may

vary depending on what is ordered with the system. The transportation case should contain
the following items (Fig.

, p.

, Fig.

, p.

, Fig.

, p.

Figure 4:

The

radEAGLE

in the standard case

radEAGLE

instrument

B KCl Calibration box

C Charger with US or European plug

c International adaptors for Charger (not with all instruments)

D Power adaptor for cars (12 V)

E Extra Battery pack for AA batteries (with screw driver)

F USB cable for connecting the

radEAGLE

to a PC

G Documents (manual, quick reference card, test sheet)

H USB Stick

Please make sure the delivered parts are complete.

16/147

Software 3.2.12 • Document 3.3.0o

© innoRIID GmbH • 2019-04-11

Summary of Contents for radEAGLE




















































































































































Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands

ORTEC radEAGLE, User Manual

Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands