ORTEC radEAGLE User Manual Download Page 103

Page: 103 / 147

radEAGLE

User Manual

radEAGLE

Web Interface

7.8 Software Update

You can upload updates or additional software to your

radEAGLE

in this section of the Web

interface (Fig.

119

, p.

103

You can either drop an appropriate ﬁle on the page or click the button to choose a ﬁle with
the standard ﬁle selection method of your device.

RADEAGLE

18181

Figure 119:

Update software on the

radEAGLE

in the Web interface

The ﬁle will be transferred to the

radEAGLE

, checked and prepared for installation (Fig.

120

103

RADEAGLE

18181

Figure 120:

Transfer software to the

radEAGLE

in the Web interface

After the ﬁle is checked and identiﬁed, you have to launch the installation by clicking



(Fig.

121

, p.

103

RADEAGLE

18181

Figure 121:

Ready to install the transferred software

You will be informed about the result (Fig.

122

, p.

104

) and the the instrument will be

restarted if necessary.

© innoRIID GmbH • 2019-04-11

Software 3.2.12 • Document 3.3.0o

103/147

Summary of Contents for radEAGLE




















































































































































Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands

ORTEC radEAGLE, User Manual

Search results

Summary of Contents for radEAGLE

Reviews:

Related manuals for radEAGLE

Brands by name

Popular brands