Orro Multiway, Installation Manual

Page: 29 / 53

27
0.6 inches (15mm)
Actual Size
1.
If the ends of the wires in your switch box are bent out
of shape, use pliers to cut and discard them.
2.
Strip the wire by removing the plastic casing. Make
sure exposed wire ends are 0.6 inches (15mm).
3.
Use the diagram above to measure and trim the wire
ends. Use solid 12 or 14 AWG copper wire only.
The wires coming out of your wall need to have straight
stipped ends for proper operation:
Strip and Straighten Wall Wires
2