OPERATING INSTRUCTIONS
ENGLISH
4
Locate the battery zipper pocket and the power cable on the
inside of the hand warmer.
Insert power cable into the designated port on the battery.
The heating level can be adjusted by a short press of the power
button. To indicate the setting has changed, the logo/power button
will cycle through solid red, white and blue illumination with each
press.
To power on, press and hold the power button for three
seconds, and the hand warmer begins to preheat for five
minutes (power button/logo illuminates and flashes red).
When fully preheated, the hand warmer will automatically
adjust to medium heat (power button/logo illuminates solid
white).
3
HIGH
SOLID RED
MEDIUM
SOLID WHITE
LOW
SOLID BLUE
PRE-HEAT
BLINKING RED
To turn off, press and hold the power button for three seconds
until the power button turns off.
4
