Oromed ORO-N6 BASIC, Introduction Manual, Page: 46 / 64

– 46 –
Measure Procedure
Refer to picture 07
The monitor is designed to take measurements and store the measu-
rement values in memory for two people using User ID A and User
ID B.
1. Sit comfortably in a chair with your feet flat on the floor.
2. Select your User ID (A or B).
Stretch your arm forward on the desk and keep relaxing, make
sure the palm of hand is upturned. Make sure arm is in correct
position, to avoid body movement. Sit still and do not talk or move
during the measurement.
After the cuff has been appropriately positioned on the arm and con-
nected to the blood pressure monitor, the measurement can begin:
a) Press the Stop/Start button. The pump begins to inflate the cuff.
In the display, the increasing cuff pressure is continually displayed.
b) After automatically reaching an individual pressure, the pump
stops and the pressure slowly falls. The cuff pressure is displayed
during the measurement.
c) When the device has detected your pulse, the heart symbol in the
display begins to blink.