Note:
The Delete button in the
Edit Leap Second
window will only be visible
if a leap second has been set beforehand.
3.2.4
Local Clock(s), DST
The
Local Clock
feature allows for maintaining one or several local times. These times will
reflect a time offset, thereby accounting for Time Zone, and DST (Daylight Savings Time)
correction.
3.2.4.1 Adding a Local Clock
To add a Local Clock:
1.
Navigate to
MANAGEMENT > OTHER: Time Management
.
2.
Click the PLUS icon in the
Local Clocks
panel in the
Time Management
screen.
3.
The
Local Clock
pop-up window will display.
4.
Enter a
Name
for your local clock.
The name must be between 1 and 64 characters long; spaces are allowed.
The name can be any meaningful name that helps you know your point of ref-
erence (for example: “NewYork”, “Paris” or “EasternHQ”, etc.).
This name will be used as cross-reference drop-down in the applicable Input
or Output port configuration. Please note the following limitations apply to
this option:
3.2 System Time
CHAPTER
3
•
VelaSync 1232 User Manual Rev. 4
107
Summary of Contents for Spectracom VelaSync 1232
