Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 154 / 392

Open result in the new Trajectory Editor window
Write to file and open result in the new Trajectory Editor window
Write to file.
With the latter two options, click the lower file folder icon, and select a file loc-
ation and file format .
3.
Select a Preset (Car, Aircraft, Ship) to pre-populate the fields below. Click Apply .
4.
Adjust the parameters as described under "Converting a Trajectory in StudioView"
on page 136 and click to begin the conversion. Look out for possible
error messages and follow the screen instructions to resolve any found issues.
4.9.10 Improving a Trajectory
StudioView Trajectory Converter (see "Converting a Trajectory in StudioView" on
page 136 ) has several adjustable parameters that can be used to enhance a trajectory, thus
making it more suitable for simulation.
In StudioView, open the Trajectory Converter tool by clicking the icon, or navigate to
Tools > Trajectory converter :
Apply changes to the original trajectory as needed, following the tabs from left to right.
The diagram below illustrates some of the parameters.
138 User Manual GSG-5/6 Series Rev. 27
4.9 Studioview Tasks