Page 5 of 24
GENERAL INSTRUCTIONS FOR
CMS-17
SWITCHING AND BREAKING SUBSTATION
IG-178-GB
version 01
11.08.2011
1.1. INTERIOR SWITCHGEAR
The electrical equipment of the
CMS-17
Switching and Breaking Substation is located inside
and anchored to the enclosure and has the following types of configuration:
a)
Switching and Breaking Substation,
made up of the following components:
- Switchgear unit formed by up to 4 MV feeder functions completely insulated in
SF
6
, with an insulation voltage of 24 kV.
b)
Switching and Breaking Substation with Protection units
, made up of the following
components:
-
Switchgear unit formed by 2 MV feeder functions completely insulated in SF
6
, with
up to two fuse protection units.
The maximum single-wire diagrams available for the
CMS-17
Switching and Breaking
Substation are shown below:
Figure 1.2: CMS-17 substation 4L single-wire diagram
Figure 1.3: CMS-17 substation 2LP+P single-wire
diagram
