6
4.
Group data automatic transmission Long press
CH button, the icon will blink on the screen.
Press to switch the value between or
- When the CH channel is changed, the stored data is
transmitted to all lights under the same channel as the
trigger. “Group data automatic transmission”
Icon will show
- Turn off this function
5.
Channel
: corresponds to the CH value. When light
is using a TR-V6 receiver, the CH value should be the
same on both transmitter and receiver so that the light
can be triggered by the transmitter.
6.
Channel icon
: short press
, the icon will blink,
Press
to increase or decrease the
channel value, CH00 ~ CH15, a total of 16 channels.
7.
Group icon
: short press
, the icon will blink
Press
to increase or decrease the group
value, 0/A ~ I, can set 10 GR groups.
Lights under each group can be adjusted independently.
The number of lights in each group is unlimited.
