6
For Your Safety
Always keep this product dry. Do not use in rain or in damp conditions.
Please dry your hands before handling the equipment, as wet hand are
dangerous to both the equipment and to you.
This product contains high-voltage electronic parts. Touching the
high-voltage circuit inside it may result in electric shock. Do not
disassemble. Should repairs become necessary, this product must be
sent to an authorized maintenance center.
Stop using this product if it breaks open due to internal shifting, falling
or strong impact. STRONG electric shock may occur if you touch the
components inside.
Do not use the strobe unit in the presence of flammable gases,
chemicals and other similar materials. In certain circumstances, these
materials may be sensitive to the strong light emitting from this strobe
unit and fire may result.
Do not leave or store the strobe unit if the ambient temperature reads
over 122°F/50°C (e.g. in automobile in the sun). Otherwise the
electronic parts may be damaged.
Do not insert metal parts into any lighting equipment, except the
special umbrella channel. Please ensure that you have firmly tightened
the handle on the umbrella bracket before using it to support the unit
Do not touch the electrical contacts on the strobe or battery or contact
them with any conductive materials.
This strobe has an over-heat protection circuit, rapid continuous firing
will cause the strobe to slow operation and trigger a “cool down”
period. After this period, the strobe will resume normal operation. You
may also reboot the strobe by cycling the power off and then on.
In case of abnormal function, sparks, excessive heat, flames or smoke,
immediately power off the unit and disconnect the battery if possible.
Have it checked by an authorized technician.
