UM0972050 R1-6
11
UM0972050 R1-6
10
Figure 13
4.1.9. Vertical line mark
Enable this option to show a reference line. The reference line is
displayed as a vertical green line. See Figure 40 on page 17.
4.1.10. Marker position
Adjusts the vertical position of the reference line. This can be set
between 38 and 63. The left and right sides swap position depend-
ing on the settings of the camera mirror-image function.
4.1.11. Graticule
This option shows a graticule for a rearview camera on the monitor.
See Figure 40 on page 17.
4.1.12. Camera type
Select the camera type that is connected. The special features of
that camera type will then become available. The camera types that
can be selected are:
AFZ
: Enable this option if an AFI/AF zoom camera is connected. If
AFZ is selected, the backlight, zero lux and stabilizer options are
enabled.
Operation of the zoom function:
Button 5 -
Enable the zoom function. The zoom function is
disabled if the button is pressed again.
Button 6 -
Zoom out.
Button 7
- Zoom in.
TIC
: Enable this option if a Thermal Image Camera (TIC) is con-
nected. If TIC is selected, then the video standard, color LUT, TIC
DDE and spot meter options are enabled.
CCC
: Enable this option if a Compact Color Camera (CCC) is con-
nected.
4.1.13. Video stndrd
Video standard: The camera type must be set to TIC. Select the
standard video output for the camera: PAL or NTSC (NTS).
4.1.14. Backlight
This option corrects the background light in order to improve the
screen display of dark objects in bright/lit surroundings. This option
is only available if an AFZ camera is connected to a serial 12” moni-
tor. For direct button operation: Button 2.
Figure 14
Figure 15
Figure 16
4. Service menu
4. Using the service menu
To open the service menu, simultaneously press the camera selec-
tion button (1), the minus button (6) and the plus button (7) (see
Figure 13). The display (see Figure 14) will appear. The following
buttons are used to navigate through the menus:
5 - Option/previous menu:
Return to the previous menu
6 - Minus
: Go to the next menu option
7 - Plus
: Go to the previous menu option
8 - Enter
: Select or enable the chosen option
4.1. Camera settings
Select camera settings. Press enter to open the 'Camera settings' menu.
Use the minus (6) and plus (7) buttons to select which camera to con-
figure. Then confirm this selection by pressing the enter button (8). The
yellow cursor is now activated in the list of items. Use the minus (6) and
plus (7) buttons to select the item to adjust and then confirm this selec-
tion by pressing the enter button. If the selection is an on/off switch, you
can choose between on and off. If the selection is a number, you can
change the value using the minus (6) and plus (7) buttons. Save the new
settings by pressing the enter button (8).
4.1.1. Mirror
Enable this option to reverse the image (left/right).
4.1.2. Upside down
This option flips the image (upside down).
4.1.3. Brightness
The setting for the brightness of the monitor. For direct button
operation: Button 4.
4.1.4. Contrast
The setting for contrast on the monitor. For direct button operation:
Button 3.
4.1.5. Saturation
The color saturation setting for the camera image. For direct button
operation: Buttons 3+4.
4.1.6. Switch delay
Enable this option if the switchwire is controlled by an intermittent
signal (e.g. from an indicator light).
4.1.7. Horizontal line mark
Enable this option to show a reference line. The reference line is
displayed as a horizontal green line. See Figure 40 on page 17.
4.1.8. Marker position
Adjusts the vertical height of the reference line. 0 corresponds to
the top edge of the monitor and 100 to the bottom edge.
Figure 17
4. Service menu
Depending on the choice of
camera type (see Figure 17),
the settings marked in blue will
or will not be available.
Button
3
Button
4
Button
5
Button
6
Button
7
Button
2
Button
1
Button
1
Button
3
Button
4
Button
8
Button 7
Button 8
Button
3
Button
4
Button
5
Button
6
Button
7
Button
2
Button
1
Button
1
Button
3
Button
4
Button
8
Button 7
Button 8
Button
3
Button
4
Button
5
Button
6
Button
7
Button
2
Button
1
Button
1
Button
3
Button
4
Button
8
Button 7
Button 8
Button
8
= Enter/Standby
Button
7
= Selection/setting Plus(+)
Button
6
= Selection/setting Minus(-)
Button
5
= Option/previous menu
Button
4
= Brightness
Button
3
= Contrast
Button
2
= ABC, day/night settings
Button
1
= Camera selection