6
UM0972191 A 02
7. Advanced settings
Note: This option shows a menu of settings that
rarely need adjustment and are better left to qualifi ed
technicians.
This chapter describes the advanced settings of language
selection, factory default resetting, channel settings,
Switchwire settings, Communication settings, Sequencer
settings, Communications settings, OSD settings and
boundary settings, see figures 11 and 12.
7.1. Language
This option opens the language selection menu. See
figure 13. The selected language will be used for all OSD
menus. The OSD menu is available in English, Dutch,
German, French, Czech, Hungarian, Italian, Polish,
Portuguese, Spanish, Turkish, Swedish, Finnish, Danish
and Norwegian.
7.2. Default settings
Select defaults
See figure 14. This option opens the factory defaults
menu. Choose the number of the desired factory set-
tings (11 default settings, 1 = standard Orlaco).
Restore defaults
See figure 14. If the option ‘restore defaults’ is selec-
ted, the factory settings will be reset.
Warning
: All user
settings will be lost when factory defaults are reset.
7.3. Channel settings
The channel settings can be modified. Per channel (CH1-
CH9) you can choose a window (W1-W4 and define per
window which camera (C1-C4) is shown, see figures
15, 16.
W1 on/off
When enabled the window is displayed.
W1 Camera
Select here which camera (C1-C4) should be shown in
this window.
W1 priority
Select the window priority, see figure 17.
LOW: lower window
NOR: middle window
HI: upper
window
Note: There’s only one priority high- and one priority
low possible. Make sure that the priority normals do
not overlap each other.
User manual
Figure 14
Figure 15
Figure 16
Figure 13
Figure 11
Figure 12
7
7
UM0972191 A 02
W1 hor. pos.
Determine the window top left horizontal position.
(adjustable between 0-100)
W1 ver. pos.
Determine the window top left vertical position.
(adjustable between 0-100)
7.4. Switchwire settings
See figure 19.
These settings are used in other (special) products
from Orlaco and have no function in this confi gura-
tion. Please do not change the settings.
7.5. Sequencer settings
See figures 20, 21.
Auto seqeuncer mode;
select how the sequencer will
step through the channels when running in automatic
mode. OFF/FWDforward)/BWD(backward).
Set sequencer timer;
Set the sequencer interval time
from 0,5 to 5 seconds
Auto sequence range;
Set the range of channels that
the sequencer will use when in automatic mode. 1-2
to 1-9.
Sequence skip blank;
When checked, the automatic
sequencer will skip channels where the window 1 has
no video signal.
Man sequence range;
Set the range of channels that
the sequencer will use when in manual mode. 1-2 to
1-9.
Sequence skip blank;
when checked, the manual con-
trolled sequencer will skip channels where the window
1 has no video signal
W1 size
Select the size of the window, see figure 18.
Adjustable options:
Fig. A.
1/1, 3/4, 2/3, 1/2, 1/3, 1/4, 1/5, 1/6, 3/4, 2/3, 1/2.
Fig. B.
34W, 23W, 12W, 13W, 14W, 15W, 16W.
Fig. C.
34H, 12H, 13H, 14H, 15H, 16H.
User manual
Figure 17
Figure 19
Figure 20
Figure 18A
Figure 18B
Figure 18C
1/6
1/5 1/4
1/3
1/2
2/3
3/4
1/1
16W
15W 14W
13W
12W
23W
34W
1/1
16H
15H
14H
13H
23H
12H
34H
1/1
