A
SM0993610 A01
Toyota (BT) RR series reachtruck
Article no. 0401412
Safety
In order to guarantee safe operation, these safety instruc-
tions must be read before you start using this equipment.
• Do not open the enclosure. The camera and the P&T
enclosure are pressurised. This can cause damage, short-
circuiting or electrical shocks.
• Do not expose the equipment to extreme temperatures.
This can cause deformation of the enclosure or damage to
internal components.
• Repairs or adjustments to the equipment may only be
undertaken by Orlaco.
• The equipment must be assembled as shown in this
manual.
• If there have been alterations or changes to this equipment
that have not been specifically approved by Orlaco, use of
this equipment is not permitted.
Preface
Before you start using this equipment, please read this manual carefully
and follow all instructions. This installation manual describes the func-
tions of the equipment, outlines the connection options and explains how
to put the equipment into operation. We recommend that you keep this
manual in a safe place for reference purposes.
If you have any questions or issues concerning the operation of this
equipment, consult the relevant section in the manual or contact the
Orlaco Products BV Service department.
The camera and monitor systems from Orlaco comply with the latest CE,
ADR, EMC and mirror-directive regulations. All products are manufac-
tured in accordance with the ISO 9001 quality management, IATF 16949
quality automotive and ISO 14001 environmental management.
Articles included in set 0401412
0198710 Fork camera
0301820 Mast cable 15m
0304341 Mast cable 5m
0208902 Display 7” RLED RC 4 CS
0404710 Junction box Reachwagen
0404720 Junction box Fork carriage
System Manual
8P male
Connector
8P male
8P female
1 coax
2 coax shield
3 red
4 black
5 orange
6 yellow
7 grey
8 nc
3P female
Connector
3P female
1 white
2 blue
3 red
To BT X29 connector
(See Fig. 3 on page 4)
To BT X50 connector
(See Fig. 3 on page 4)
Art. No. 0310820
Mastcable Forklift 15m 8p
Springplates included
Springplates Forklift
Springplates Forklift
Art. no 0301960
Uni cable 1m
Included with
Art. No. 0198710
Camera
3P male
1 white
2 blue
3 red
4p female
Connector 4p female
1 coax
2 coax shield
3 red
4 black
4P male
1 coax
2 coax shield
3 red
4 black
0304341
Mastcable Reachtrucks 5m
Art. No. 0404710
Junctionbox Reachwagen
Art. No. 0404720
Junctionbox Fork Carriage
Art. No 0208902
Display 7” RLED
48V/DC
red
white
Art. No. 0198710
Forkcamera
Connector
8P female
Connector
3P male
Connector 4p male
Installation of an Orlaco camera-
monitor system on a Toyota (BT) RR series reachtruck
The RR Series reachtruck always has a 3-wire mastcable for control of a
solenoid valve in the forkcarriage. Especially for this model of reachtruck
Orlaco developed set 0401412 as shown below:
Important
Roll out the mastcable entirely to remove kinks
before installing it in the mast of the truck.
Fig. 1: Lay-out of 0401412 camera system set
