6
IM0973585 A 02
4. Technical specifications
Installation manual
General
Type
a-Si TFT, Normaly black, Transmissive, with Cover Lens.
Resolution
WXGA 1280 x RGB x 800 pixels.
Active Area
150.528 (H) x 94.08 (V) (7” diagonal).
Softwaremenu
Full On-Screen-Display (OSD) functionality in 15 languages.
ABC mode
Improved Auto Brightness Control (ABC) including adjustable minimum and maximum levels for automatic control.
Light output
1000 Nits, sunlight readable.
Operating temperature
-30°C...+75°C.
Weight
0,84Kg. (included cables)
Features
Optically bonded display with chemically strengthened cover glass protected against water, robust design.
Integrated Capacitive keyboard in slim design. Glass cover with ARAF surface treatment.
The Monitor 7” HLED is applicable in a system with a Digicoax switcher and 4 HMOS cameras. This combination must be
powered only by using input voltage of 24V/DC.
Mounting hardware
Adjustable brackets can be ordered separately (Art No.2015500).
Electrical
Input voltage range
12V/24V/DC
Power consumption
12W@24V.
Protection:
Above 33V overvoltage protection, protection deactivated below 30V.
Below 7V undervoltage protection, protection deactivated above 8V.
Protected against load dumps, spikes and surges, reverse polarity on all wiring.
Power-output:
For powering camera. Output current 1A max. Power output is input voltage, protected against load dumps, spikes, surges and
reverse polarity.
Video input
Coax GMSL.
Cables
1m multicable (power) open wired, 1m multicable (video) with M16 molded 4p Digicoax female connector.
Mechanical
Surface
Optical bonded, Glass cover with ARAF surface treatment.
Housing
Color Black, material: high impact automotive thermoplastic.
Protection
IP69K according DIN 40050 part 9, IP67 according EN60529.
Temperature/humidity test
According IEC60068-2-1/2/3/14/30/38.
Certifi cation
Quality & environment
Units are manufactured by Orlaco in the Netherlands; ISO 9001, ISO14001, ISO-TS16949.
Approvals
R10, EN13309, ISO EN 14982, ISO 13766.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Available documentation
User manual
UM0972225
Installation manual
IM0973585
