24
Follow these steps: On your PC monitor choose a resolution of 1360 × 768 at 60Hz and save this
configuration. Shut down your PC and connect the shut off LCD TV.
Use a screensaver to avoid burning-in of static picture content.
Use a PC-VGA cable (not supplied) to connect the LCD-Monitor
to your PC. Make the connections carefully so as not to break or
bend the contacts inside the plug.
Note:
If no signal or a signal with a non-supported resolution is
connected, No Signal is displayed
As this LCD-TV is not a PC monitor correct display cannot be
guaranteed for every PC / graphics card.
In the PC input mode, Sharpness, Colour, Noise Reduction
and Film Mode are not available.
•
•
•
Supported PC resolutions
resolution
fps (Hz)
1360x768
60
1280x1024
60
VGA Cable (not supplied)
Audio cable (not supplied)
TV (Rear view)
to PC/DVI AUDIO input
PC
The HDMI input receives digital audio and uncompressed video from a HDMI equipped device or
uncompressed digital video from a DVI equipped device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it only transfers the video signal, so it
is necessary to use separate analogue leads to transfer the audio signals.
Select the HDMI input mode (see P.12).
or
DVI device
HDMI device
To DVI output
Audio cable (not supplied)
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
HDMI cable
(type A connector)
(not supplied)
To HDMI output
To PC/DVI AUDIO input
TV (Rear view) TV (Side view)
Connecting an HDMI
or a DVI device to the HDMI input
PC connection
Note:
Follow the user’s manual that came with the HDMI-system, which you try to connect to this TV.
•
TV (Rear view)
Select PC input
Switch on the LCD-TV.
Select the PC input mode (see page 12).
3DH0114B_EN.indd 24
3DH0114B_EN.indd 24
5/12/11 9:45:56 AM
5/12/11 9:45:56 AM