Orion TV-32082 Operating Instructions Manual Download

Page: 7 / 40

Location of controls

Front Side

Description of Indicators and Controls

1. Loudspeakers
2.

(On/Standby) indicator:

It lights up in red at standby, and in green at power on.

3. Remote sensor
4.

(Channel)

▲

▼

buttons:

Press

▲

to change to a higher numbered channel set into memory.

Press

▼

to change to a lower numbered channel set into memory. In Menu: Setting. In Standby:

Turning on the unit.

(Volume) +/– buttons /

In Menu: Setting.

6. MENU button:

To display the menu screen.

7. TV/AV/PC button:

Select input mode for TV/AV/COMPONENT/HDMI/PC.

(Power) button:

To turn the unit on or off. Power is still used unless the AC power cord is

disconnected from the supply.

Right Side (TV-37094)

Top (TV-32082)

3Z70146B_En_P02-10

10/6/06, 1:39 PM

Summary of Contents for TV-32082









































Search results

Summary of Contents for TV-32082

Reviews:

Related manuals for TV-32082

Brands by name

Popular brands

Orion TV-32082, Operating Instructions Manual

Search results

Summary of Contents for TV-32082

Reviews:

Related manuals for TV-32082

Brands by name

Popular brands